Không có sản phẩm trong giỏ hàng!
Flame Detector
INTRODUCTION
Fire detector is using a flame sensor that can detect fire or other light source with wavelength of 760 nm ~ 1100 nm light. This is helpful if you want to make your own fire detector/alarm for your own house. Let’s have a look on how it works.
HARDWARE PREPARATION
This tutorial use :
You can make the hardware connection based on the diagram and table below.
Connection | |
---|---|
Flame Sensor : VCC | Maker UNO: 5V |
Flame Sensor : GND | Maker UNO: GND |
Flame Sensor : A0 | Maker UNO: A0 |
Flame Sensor : D0 | Maker UNO: Not Connected |
Sample Code
This is the sample code used for this tutorial. Try it!
[gist https://gist.github.com/atifahsuad/3af5370cea077dbb1fb08efdd0f1758e/]
Thank you
Thank you for reading this tutorial and we hope it helps your project development. If you have any technical inquiry, please post at Cytron Technical Forum.